1307-LV - For Kit Aircraft

Epoxy Resin for Kit Aircraft -

High performance, low viscosity multifunctional epoxy resin containing minimal reactive diluent content for maximum property retention. Reduced viscosity allows for faster and easier wetting of reinforcement materials. 100% solids, no VOCs, very clear, highly resistant to crystallization, low odor and skin toxicity, and DOT non-regulated.

_images/medium/12231232571307-LV 380x308 template.jpg

Suggested Uses

High performance composites and adhesives for homebuilt “Kit” aircraft.

Properties of Rhino 1307-LV Epoxy Resin (neat)

Viscosity:1100 - 1250 cps
Weight/Gal:9.5 lbs
EEW:183 - 189
Color:1+ (Gardner)


Recommend Rhino 1307-LV be used between 65° - 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1307-LV so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 - 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.


Rhino 1307-LV cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.

How Supplied

8lb Gallons, 45lb Pails, and 500lb drums. FOB San Diego, CA.


Rhino Equipment
Civil Engineering
Resins - 908 - 1315
Resins - 1316 - 1409
Specialty Products