1306T - Thixotropic Low Viscosity
Thixotropic Low Viscosity Epoxy Resin –
Suggested Uses
Hand lay up laminating, tooling and pattern work, adhesives and surface coatings.
Properties of Rhino 1306 Epoxy Resin (neat)
| Viscosity: | 1,000 - 14,00 cps |
| Weight/Gal: | 9.3 lbs |
| EEW: | 196 - 202 |
| Color: | Milky White Translucent Liquid |
Mixing
Use and store between 65° - 80°F (product and ambient temperatures), 45°F minimum. Use below 45°F requires special hardener selection, consult with Rhino sales personnel for recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Wax or release mold surfaces before epoxy application. All Rhino curing agents are compatible with Rhino 1306T so proportion resin per the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the mixing container bottom and sides. Mix no more material than can be applied before pot life expiration.
Curing
Rhino 1306T cures overnight at typical ambient temperatures (50°- 90°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
How Supplied
45lb pails and 500lb drums (Minimum order 450lbs). FOB San Diego, CA.
