1319 - Grizzly Epoxy Resin

“Grizzly” Epoxy Resin –  

Medium viscosity, toughened epoxy resin modified for added adhesion properties and improved flexibility. Quickly wets reinforcement materials. 100% solids, highly resistant to crystallization in cold environments. Light amber is standard color, available in Black and White by special order with minimum quantities required. No VOCs and DOT non-regulated.

_images/medium/12311415441319 380x308 template.jpg

Suggested Uses

Press molding, hand lay up laminating, adhesives.

Properties of Rhino 1319 Epoxy Resin (neat)

Viscosity:4,000 - 5,000 cps
EEW:205 - 210
Color:Light amber liquid (Black and White by special order)
Weight/Gal:9.5 lbs


Recommend Rhino 1319 be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1319 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.


Rhino 1319 cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.

How Supplied

45lb Pails and 500lb Drums (net weights). FOB San Diego, CA.


Rhino Equipment
Civil Engineering
Resins - 908 - 1315
Resins - 1316 - 1409
Specialty Products