Hand lay up laminating, vacuum bagging, general purpose tooling and pattern work.
Properties of Rhino 1315 Epoxy Resin (neat)
|Viscosity:||500 - 700 cps|
|EEW:||175 - 195|
|Competitive Offsets:||Reichold 37-130, Shell 815|
Recommend Rhino 1315 be used between 50° - 100°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1315 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
Rhino 1315 cures overnight at typical ambient temperatures (50° - 100°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
4 x 45lb pails (minimum order), 500lb drums (net weight). FOB San Diego, CA.