top

1311 - Intermediate Viscosity

Intermediate Viscosity Epoxy Resin -

 

Rigid epoxy resin, based on Bis-A. Viscosity intermediate between Rhino 1308 and 1303 for medium build and fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated. 

 

_images/medium/12231158291311 380x308 template.jpg

Suggested Uses

Hand lay up laminating, general purpose tooling and pattern work.

Properties of Rhino 1311 Epoxy Resin (neat)

Viscosity:2,100 - 2,400 cps
EEW:191 - 195
Color:2 (Gardner)
Weight/Gal:9.4 lbs
Competitive OffsetsDow 325, Shell CS 242

Mixing

Recommend Rhino 1311 be used between 65° - 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1311 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 - 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.

Curing

Rhino 1311 cures overnight at typical ambient temperatures (65° - 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.

How Supplied

4 x 45lb pails (minimum order), 500lb drums (net weight). FOB San Diego, CA.

Products

Rhino Equipment
Civil Engineering
Systems
Resins - 908 - 1315
Resins - 1316 - 1409
Hardeners
Specialty Products
Brochures

bottom