top

1310L-6 - Laminating and Tooling

Laminating and Tooling Epoxy Resin -

Medium viscosity, rigid epoxy resin with excellent physical properties. Fast wetting of reinforcement materials. 100% solids, clear, and highly resistant to crystallization in cold environments. No VOCs and DOT non-regulated.

_images/medium/12231203581310L-6 380x308 template.jpg

Suggested Uses

Hand lay up laminating, vacuum bagging, tooling and pattern work.

Properties of Rhino 1301L-6 Epoxy Resin (neat)

Viscosity:1,000 - 1,200 cps
Weight/Gal:9.4
EEW:190-196
Color:2 (Gardner)

Mixing

Recommend Rhino 1310L-6 be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1310L-6 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.

curing

Rhino 1310L-6 cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties. 

How Supplied

9lb Gallons, 45lb Pails, and 500lb Drums. FOB San Diego, CA.

Products

Rhino Equipment
Civil Engineering
Systems
Resins - 908 - 1315
Resins - 1316 - 1409
Hardeners
Specialty Products
Brochures

bottom