Hand lay up laminating, adhesives, crack repairs, mortars and penetrating sealers.
Properties of Rhino 1308 NC Epoxy Resin (neat)
|Viscosity:||500 - 700 cps|
|EEW:||201 - 207|
|Competitive Offsets||Ciba Geigy GY 9513, Dow 324, Resolutions 8132|
Recommend Rhino 1308 NC be used between 65° - 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1308 NC so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3-5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.
Rhino 1308 NC cures overnight at typical ambient temperatures (65° - 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties.
9lb Gallons, 45lb Pails, 500lb drums and bulk tanker. FOB San Diego, CA or through authorized Rhino Linings Corporation Distributors