Filament winding, hand lay up laminating, vacuum bagging, tooling and pattern work, castings, adhesives, surface coatings and chemically resistant flooring.
Properties of Rhino 1301AR Epoxy Resin (neat)
|Viscosity:||11,000 - 13,000 cps|
|Weight/gal:||9.7 - 9.8 lbs|
|Competitive Offsets:||Ciba Geigy GY 6010, Dow 331, Shell 828|
Use and store between 65°– 80°F (product and ambient temperatures), 45°F minimum. Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino Hardeners are compatible with Rhino 1301AR and should be proportioned in accordance with the selected Rhino Hardener mix ratio. Use of 1301AR resin in RTM or filament winding processes require specialized hardener(s) and equipment. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no more material than can be applied before the expiration of the pot life.
Rhino 1301AR curing is determined by the selected Rhino™ hardener, see the hardener technical data sheet.
9lb Gallons, 45lb Pails, and 500lb Drums. FOB San Diego, CA.