top

1301.5301-TN5 - Standard Undiluted

Standard Undiluted Epoxy Resin -

Standard undiluted Bis-A formulation for general use. High viscosity, clear, rigid resin with low toxicity and odor. No solvents, 100% solids, DOT non-regulated.

_images/medium/12231154091301.5301-TN5 380x308 template.jpg

Suggested Uses

Filament winding, hand lay up laminating, vacuum bagging, tooling and pattern work, castings, adhesives, surface coatings and chemically resistant flooring.

Properties of Rhino 1301 Epoxy Resin (neat)

Viscosity:10,000 - 13,000 cps
Weight/gal:9.7 - 9.8 lbs
EEW:188
Color:1+ (Gardner)
Competitive Offsets:Ciba Geigy GY 6010, Dow 331, Shell 828

Mixing

Use and store between 65° - 80°F (product and ambient temperatures), 45°F minimum. Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application.

All Rhino Hardeners are compatible with Rhino 1301 and should be proportioned in accordance with the selected Rhino Hardener mix ratio. Use of 1301 resin in RTM or filament winding processes require specialized hardener(s) and equipment. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no more material than can be applied before the expiration of the pot life.

Curing

Rhino 1301 curing is determined by the selected Rhino™ hardener, see the hardener technical data sheet.

How Supplied

9lb Gallons, 45lb Pails, and 500lb Drums. FOB San Diego, CA.

Products

Rhino Equipment
Civil Engineering
Systems
Resins - 908 - 1315
Resins - 1316 - 1409
Hardeners
Specialty Products
Brochures

bottom