1367-L16 - Epoxy Resin for Coatings

Epoxy Resin for Coatings –  

High performance, low viscosity epoxy resin containing proprietary reactive diluent for maximum property retention. Contains surfactants for minimal surface imperfections. 100% solids, no VOCs, very clear, highly resistant to crystallization, low odor and skin toxicity, DOT non-regulated.

_images/medium/12311417401367-L16 380x308 template.jpg

Suggested Uses

Clear coatings, mortars and grouts, crack injection and hand lay-up laminating.

Properties of Rhino 1367-L16 Epoxy Resin (neat)

Viscosity:1,000 - 1,300 cps
Weight/Gal:9.3 lbs
EEW:189 - 195
Color:Clear, slightly translucent liquid


Recommend Rhino 1367-L16 be used between 65° – 85°F (product and ambient temperatures). Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino curing agents are compatible with Rhino 1367-L16 so proportion resin and hardener in accordance with the selected Rhino hardener. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no material than may be applied before the expiration of the pot life.


Rhino 1367-L16 cures overnight at typical ambient temperatures (65° – 85°F) with full properties developing in 7 days, see hardener data for specific cure schedules and properties. 

How Supplied

45lb Pails, and 500lb drums (net weights). FOB San Diego, CA.


Rhino Equipment
Civil Engineering
Resins - 908 - 1315
Resins - 1316 - 1409
Specialty Products