top

1355-R1 - Enhanced Low Viscosity Bis-F Resin

Enhanced Low Viscosity Bis-F Epoxy Resin –  

Low viscosity, undiluted Bis-F phenol novolac resin with high functionality, enhanced for added air release and fiberglass compatability. Increased flexibility and chemical resistance as compared to standard Bis-A resins. Higher functionality (2.15) than competitive resins of similar viscosity. Exceptionally low hydrolyzable chloride content makes this resin a good material for electronics applications such as potting and encapsulation. No solvents, 100% solids, low odor and toxicity, DOT non-regulated. 

_images/medium/12311417161355-R1 380x308 template.jpg

Suggested Uses

Filament winding, hand lay up laminating, vacuum bagging, tooling and pattern work, electronics, castings, surface coatings and chemically resistant flooring.

Properties of Rhino 1355-R1 Epoxy Resin (neat)

Viscosity:3,200 - 4,800 cps
Weight/Gal:9.8 - 10.0 lbs
EEW:164 - 176
Hydrolyzable Chlorides:<0.10% max
Color:3 max (Gardner)
Competitive Offsets:Propriety Material

Mixing

Use and store between 65° – 80°F (product and ambient temperatures), 45°F minimum. Use below 45°F requires special hardener selection, consult with Rhino sales personnel for low temperature recommendations. Remove all surface contaminates such as water, dirt, rust, and petroleum products. Mold surfaces must be waxed or otherwise “released” prior to epoxy application. All Rhino Hardeners are compatible with Rhino 1355 R-1 and should be proportioned in accordance with the selected Rhino Hardener mix ratio. Use of 1355-R1 resin in RTM or filament winding processes require specialized hardener(s) and equipment. Mix resin and hardener for 3 – 5 minutes being certain to scrape the bottom and sides of the mixing container. Mix no more material than can be applied before the expiration of the pot life.

Curing

Rhino 1355-R1 curing is determined by the selected Rhino hardener, see the hardener technical data sheet.

How Supplied

Rhino 1355-R1 curing is determined by the selected Rhino hardener, see the hardener technical data sheet.

Products

Rhino Equipment
Civil Engineering
Systems
Resins - 908 - 1315
Resins - 1316 - 1409
Hardeners
Specialty Products
Brochures

bottom